KS90B
KS90B - Image 2
KS90B - Image 3
KS90B - Image 4
KS90B - Image 5

KS90B

OEM Accelerometer

  • These OEM accelerometers with charge output are suitable for applications in customer products. Due to the self-generating sensing element, the sensor does not require any supply energy and is therefore particularly suitable for battery-powered solutions. The sensors have very high resolution and a large bandwidth.
  • The assembly is done by gluing it into a hole.
  • Solder pins are used for connection.
Output

Charge
Axes

uniaxial
Mass

5.1 g
Sensitivity

10 pC/g
Measuring range

50000 m/s²
Upper frequency limit (3 dB)

27 kHz
Connection

Solder pins, TO-39 package
Mounting

Gluing in drill hole Ø10 (depth > 6 mm)
Operating temperature range

-40 .. 150 °C
Protection

IP60

KS90B : without accessories

  • Sensor with Total calibration chart
  • 2 years warranty

PLEASE NOTE:

Total calibration charts are not accredited reports and are therefore not covered by EA MLA (EA Multilateral Agreement)!

Downloads

Related products

KS90B KS901B10 KS901B100
Output Charge IEPE IEPE
Axes uniaxial uniaxial uniaxial
Mass 5.1 g 5,2 g 5,6 g
Sensitivity 10 pC/g 10 mV/g 100 mV/g
Measuring range 50000 m/s² 5000 m/s² 600 m/s²
Upper frequency limit (3 dB) 27 kHz 28 kHz 23 kHz
Connection Solder pins, TO-39 package UNF 10-32, axial UNF 10-32, axial
Mounting Gluing in drill hole Ø10 (depth > 6 mm) Gluing in drill hole Ø10 (depth > 6 mm) Gluing in drill hole Ø10 (depth > 6 mm)
Operating temperature range -40 .. 150 °C -30 .. 120 °C -30 .. 120 °C
Protection IP60 IP60 IP60
Lower frequency limit (3 dB) - 0.35 Hz 0.2 Hz
Broadband resolution (RMS) - 1 mg 0.4 mg